Setting Up Serial Communications - Intermec PW50 User Manual

Chapter 2 — Configuring the PW50

Setting Up Serial Communications

20
Use a serial cable (P/N 075497-001) to connect the PW50 to a PC, or
insert a CN3, CN3e, or CK61 mobile computer.
Before you can establish a serial connection, you need to make sure
that the settings on the PC or mobile computer match the settings on
the PW50.
Serial Port Default Settings on the PW50
Parameter Default Setting
Baud rate 115200
Data bits 8
Parity None
Stop bits 1
Flow control Hardware
To connect the PW50 to a PC
1 Connect the 8-pin circular DIN connector to the serial port on the
PW50.
2 Connect the other end of the serial cable to a serial port on the
back of your PC or to a serial adapter on your mobile computer.
Serial
port
PW50 Workboard Printer User's Guide
Serial
cable