Intermec PW50 User Manual page 12

Chapter 1 — Using the PW50 Workboard Printer
4
Understanding the Communications, Error, and Battery Indicators
Indicator Name
Communications Off
Error
Battery
Understanding the Intermec Ready-to-Work Indicator
State Description
Off The PW50 is in Standby mode.
On The PW50 is powered on and operating.
Blinking A blinking light can mean one of several conditions:
•
The printer is out of paper.
•
The media cover is open.
•
There is a printer error that requires you to perform an action.
For a list of possible problems, see Chapter 3,
"Troubleshooting and Maintaining the PW50."
State Description
The Bluetooth radio is off. The
Bluetooth radio turns off when
you connect a serial cable.
Steady green The Bluetooth radio is on and
the printer is not connected to a
serial cable.
Off The PW50 is off.
Steady green Ready/Data
Steady red Error
•
Off The battery is installed and
working properly.
•
There is no battery installed.
Steady green Battery is fully charged in the
PW50 with an external power
supply connected.
Steady red Battery is charging in the PW50
with an external power supply
connected.
Blinking red Battery is low.
PW50 Workboard Printer User's Guide