Setting Up USB Communications
PW50 Workboard Printer User's Guide
To set up Bluetooth communications with a mobile computer
Follow the procedure to discover and connect to Bluetooth devices
•
in your mobile computer user's manual.
Note: For maximum security, you need to configure a Bluetooth
passcode for the PW50. The default passcode for the PW50 is
"1234."
To set up Bluetooth communications with a scanner
1 Download and install EasySet.
2 Create the following bar code labels using EasySet:
•
Administrator reset factory defaults
•
Bluetooth parameters - security - not active
•
Bluetooth parameters - connect/disconnect - compose BT
address
Bluetooth parameters - security - compose PIN:
•
3 Scan the bar code labels with the Bluetooth scanner.
Understanding the Communications Indicator
State
Description
Off
The Bluetooth radio is off. The Bluetooth radio turns off
when you connect a serial cable.
Steady green The Bluetooth radio is on and the printer is not connected to
a serial cable.
To set up USB communications with your PC, you need:
•
a USB cable.
•
Intermec InterDriver® software.
You can download the InterDriver software from the Intermec web
site at www.intermec.com.
Chapter 2 — Configuring the PW50
19