Waveform monitor function
Press the WFM button in CAM mode to display a
Pressing the WFM button once again closes the
•
WFM (Page 10 ) on the setting menu SW
•
display.
•
assist function is used.
•
PAGE/AUDIO MON/VAR
If you are monitoring the sound through
•
To adjust the recording level (Page 52)
Backup recording
terminal (pages 77 and 78), you can make
shooting.
•
In the setup menus, OTHER FUNCTIONS
connected. (Page 110)
Note the following when backup recording.
•
Menu settings are retained even if you turn
recording still in effect, images on media in
After backup recording, check the menu item
settings before you operate the camera-
recorder.
•
If you use another AG-HPX170P as the
external unit for backup recording, select
unit and set it to MCR mode.
•
•
connection.
•
signals before backup recording.
•
You can have a media in the external unit
CONTROL on the setting menu OTHER
FUNCTIONS screen (Page 110) to "CHAIN".
•
you perform a rec check.
•
the unit is set up for native recording.
•
of the special recording modes: Interval
recording, One-shot recording and Loop
recording (Pages 46
48)
•
shooting (Page 66) in MCR mode.
43