Table of Contents
Advertisement
When the display is dark, increase the gain to
brighten the display.
GAIN switch
1
If the camera is in auto mode, use the
mode. (Page 35)
2
Switch the gain with the GAIN switch.
L: Set here under normal conditions. (0 dB)
M:
(The default value is 6 dB.)
H:
(The default value is 12 dB.)
You can change the M and H gain values using the
MID GAIN and HIGH GAIN items on the setting
menu SW MODE screen. (Page 101)
In auto mode, auto gain is available regardless of
OFF is selected under AGC on the setting menu
AUTO SW screen. (Page 104)
When the recording frame rate is less than 22 fps
1 and 49)
OFF:
Cuts light intensity by up to about 1/4.
Cuts light intensity by up to about 1/16.
Cuts light intensity by up to about 1/64.
ND FILTER switch
37
Advertisement
Table of Contents
