Table of Contents
Advertisement
Using presets
1
If the camera is in auto mode, use the
mode (
A
out).
2
Set the WHITE BAL switch to PRST.
•
preset in the PRST position.
Guide to the preset values
P5.6K (5600 K): outdoors
3
Press the AWB button.
5600 K.
In order to reproduce the black accurately, adjust
the black be reproduced poorly but the color tones
It is not normally necessary to adjust the black
•
•
You use the camera after not using it for a long
time.
•
The ambient temperature changes greatly.
•
•
(60i) modes.
Press the AWB button to automatically adjust the
Press and hold the AWB button to adjust the black
balance.
•
press the AWB button, make the necessary
preparations for this.
•
are shooting.
ABB ACTIVE
ABB END
•
is used).
Auto Tracking White (ATW)
You can allocate the ATW feature to one of the
PRST). Allocate it by going to the setup menus,
SW MODE screen, ATW. (Page 101)
the time of shipping. (Page 104)
shooting, the camera automatically adjusts the
•
The ATW feature automatically determines the
current shooting environment and adjusts the
environment, there may be some error in the
adjustment.
Use the procedure described on the preceding
balance.
White balance sensor
39
Advertisement
Table of Contents
