Native Recording; Standard Recording - Panasonic AG-HPX170P Operating Instructions Manual

Hide thumbs Also See for AG-HPX170P:
Table of Contents

Advertisement

Variable frame rates (VFR) (continued)

Native recording

1
Using the REC FORMAT function
(Page 104) on the RECORDING SETUP
the recording format.
2
SCENE FILE dial.
If necessary, before doing this, perform the
camera settings from the setting menu, and
3
Using the OPERATION TYPE function
(Page 98) on the SCENE FILE screen, select
FILM CAM, and set the desired recording
frame rate using the FRAME RATE function
(Page 98).
4
stop native recording in VFR mode.
during recording or recording standby in the
native mode.
used for both recording and playback.
When a recorded clip lasting a long time
is to be played back and imported using
a nonlinear editing system that supports
Varicams, the UB MODE option on the
RECORDING SETUP screen must be set to
FRM.RATE.
If the effective frame information is to be
camerarecorder from a nonlinear editing
REGEN option on the RECORDING SETUP
screen must be set to ON.
After editing, materials are output from the
nonlinear editing system in 1080i/24P or
720P/60P (24P over 60P) format.
32

Standard recording

1
2
5 )
3
4
Using the REC FORMAT function
(Page 104) on the RECORDING SETUP
SCENE FILE dial.
If necessary, before doing this, perform the
camera settings from the setting menu, and
Using the OPERATION TYPE function
(Page 98) on the SCENE FILE screen, select
FILM CAM, and set the desired recording
frame rate using the FRAME RATE function
(Page 98).
displays appear depending on the setting
item on the SCENE FILE screen.
1) PULL DOWN information displayed in
PROPERTY-CLIP PROPERTY-VIDEO
With any other settings: other
2) Format information in the bottom left of the
With any other settings: 720P/60P
24FRAME if it is 24P.)
stop standard recording in VFR mode.
Sound is recorded.
In the case of a nonlinear editing system that
frame extraction function, you can upload
even undercrank or overcrank shooting
materials as is. (The UB MODE option on the
RECORDING SETUP screen must be set to
FRM.RATE.)
After editing, materials are output from the
nonlinear editing system in 1080i/24P or
720P/60P (24P over 60P) format.
5 )
720P/24P

Advertisement

Table of Contents
loading

Table of Contents