Table of Contents
Advertisement
Shooting in manual mode (continued)
When you are shooting in manual mode, readjust
change.
You can save adjustments and reselect them by
You can also use the preset values.
Use the settings to suit the shooting conditions.
AWB button
1
If the camera is in auto mode, use the
mode. (Page 35)
2
Set the shutter speed. (Page 49)
3
Place a white pattern in a location with the
same lighting conditions and light source
whole screen with white.
the subject can be used instead.
•
Do not include bright spotlights in your shot.
4
Set the WHITE BAL switch to A or B
(whichever one you want to save the
38
WHITE BAL switch
5
Press the AWB button.
•
screen.)
AWB Ach ACTIVE
AWB Ach OK
AWB Ach NG
•
White balance cannot be adjusted if the Auto
If you have set ON under ATW (Auto Tracking
White) on the setting menu AUTO SW screen,
position. (Page 104)
Make the necessary adjustments if one of the
Error messages
LOW LIGHT
Increase light or increase
the gain.
LEVEL OVER
Reduce light or decrease
the gain.
•
If the messages repeatedly appear even after
trying a number of times, consult your dealer.
Advertisement
Table of Contents
