Table of Contents
Advertisement
The settings according to the variety of shooting
circumstances are stored in each position of scene
•
During recording, the OPERATION TYPE
and FRAME RATE (Page 98) settings remain
To change these settings, set the camerarecorder
to recording standby state.
When the camera-recorder is shipped from the
F1: SCENE
File suitable for normal shooting.
F2: SCENE FLUO.
lights, ie. indoors.
F3: SCENE SPARK
of resolution, coloring and contrast.
F4: SCENE B-STR
File for broadening the contrast of dark parts,
F5: SCENE CINE V
File suitable for shooting movie-like scenes
recording format remains unchanged even
set using the REC FORMAT option on the
RECORDING SETUP screen. (Page 104))
F6: SCENE CINE D
File suitable for shooting movie-like
changed. It must be set using the REC
FORMAT option on the RECORDING SETUP
screen. (Page 104))
1
Set the POWER switch to ON.
2
3
In the setup menus, select the SCENE FILE
screen.
•
For menu operation (Page 94)
•
You can also use the menu buttons on the
remote control. (Page 14)
4
Push the Operation lever in the e or r
direction to select NAME EDIT.
SCENE FILE F1:
MATRIX
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
LCD BACKLIGHT
LCD SET
EVF SET
SELF SHOOT
PUSH MENU TO RETURN
5
Press the Operation lever (or push it in the
q direction), then push it in the r direction
to select YES and press it again.
SCENE FILE F1:
MATRIX
SKIN TONE DTL
V DETAIL FREQ
NAME EDIT
LCD BACKLIGHT
LCD SET
EVF SET
SELF SHOOT
PUSH MENU TO RETURN
(Continued on the next page)
NORM1
OFF
THIN
––––
NORMAL
––––
––––
MIRROR
NORM1
OFF
THIN
––––
YES
––––
––––
MIRROR
53
Advertisement
Table of Contents
