Table of Contents
Advertisement
The battery
Charging
adapter.
1
Align the battery with the
the direction shown below.
•
You cannot charge the battery if the DC cord
is connected to the DC OUT connector, so
2
Plug the AC cord into the power outlet.
•
The POWER lamp and CHARGE lamp on
the AC adapter light, and charging begins.
•
attached, detach the battery and then attach
it again.
CHARGE
POWER
•
When the battery is charged, the CHARGE
lamp on the AC adapter goes out.
3
Slide the battery and remove it.
Recording time of included battery
Capacity
marking on
5400 mAh
•
not using the LCD monitor.
•
temperature is 68°F (20°C) and humidity is 60%.
Charging may take longer at other temperatures
and humidity levels.
•
and hairpins) away from the battery.
Shortcircuiting may occur across the
terminals, causing the battery to heat up,
and you may seriously burn yourself if you
touch the battery in this state.
•
used or charged. The camera-recorder itself
also becomes hot during use.
•
The recordable time reduces if you repeatedly
start and stop recording.
•
Discharge the battery before storing it. When
storing it for an extended time, charge it at
least once a year, use up its charge in the
camerarecorder, and then store it again.
•
If the battery is extremely hot or cold, the
charging starts.
•
If the CHARGE lamp continues to blink even
AC adapter. Contact your dealer.
•
•
reception so keep radios at least 1 meter
•
you are using it, but this is normal.
•
the AC adapter.
•
Operation of battery pack CGR-D16 (1600
mAh) (sold separately) is not guaranteed.
Recharging
Continuous
time
recording time
min.
min.
15
Advertisement
Table of Contents
