the LCD monitor to one of three possible levels.
1
Select LCD BL under LCD on the setting
menu SW MODE screen.
This assigns LCD BL to the LCD button.
2
Press the LCD button.
(standard)
LOW (dark)
NORMAL.
•
camera-recorder is turned off.
LCD
Flipping images vertically and
composition on the LCD monitor.
or on the LCD monitor, not the recorded image.
1
Select LCD REV under LCD on the setting
menu SW MODE screen.
This assigns LCD REV to the LCD button.
2
Press the LCD button.
•
•
•
The unit returns to normal image mode the
LCD
Switching between overscan and
underscan
Use this function to underscan or overscan the
monitor.
1
2
HIGH (bright)
Select OVERSCAN under LCD on the
setting menu SW MODE screen.
This assigns OVER SCAN to the LCD button.
Press the LCD button.
•
underscan at each press.
•
The unit returns to underscan mode the next
•
In overscan mode, a frame appears on the
screen.
LCD
23