Mp-124 Rev. E; Ethernet Led Description; Figure 3-4: Rear Panel Of Mp-124 Rev. E Model; Table 3-4: Mp-124 Rev. E Rear-Panel Description - AudioCodes MediaPack 124 Hardware Installation Manual
Family of analog media gateways
Hide thumbs
Also See for MediaPack 124:
- Quick setup manual (8 pages) ,
- Hardware installation manual (40 pages)
Table of Contents
Advertisement
3.3.2
MP-124 Rev. E
The MP-124 Rev. E rear panel is shown below and described in the subsequent table.
Item #
1
2
3
4
5
3.3.3
Ethernet LED Description
The RJ-45 Ethernet port for Ethernet interface (labeled ETHERNET), provides LEDs that
indicate Ethernet status, as described in the table below.
Label
ETHERNET
Hardware Installation Manual
Figure 3-4: Rear Panel of MP-124 Rev. E Model
Table 3-4: MP-124 Rev. E Rear-Panel Description
Label
Protective earthing screw (mandatory for all
installations). Accepts a 6-32 UNC screw.
AC power supply socket.
100-240 V~
50 - 60Hz 1A
ANALOG FXS
50-pin Telco connector, providing up to 24 FXS analog
LINES 1–24
lines.
RJ-45 port for serial (RS-232) communication.
RS-232
RJ-45 port for 10/100Base-TX Ethernet interface.
ETHERNET
Table 3-5: Rear-Panel Ethernet LEDs Description
Color
State
Green
On
Red
On
Component Description
Valid 10/100Base-TX Ethernet connection.
Malfunction.
16
MP-124
Function
Document #: LTRT-59847
Advertisement
Table of Contents
