Attaching The Enclosure - D-Link DCS-6112 User Manual

Installation
1. When you slide the camera housing over the camera, align the
two plastic tabs on the inside of the cover with the notches on the
camera.
2. If you choose to the feed the cable through the ceiling or wall,
arrange the cable neatly through the cable hole. If you choose to
feed the cable from the side, remove Plate A.
3. Attach the dome cover to the camera as the shown to the right. The
dome cover cannot be attached if the angle is not correct.
4. Finally, make sure all parts of the camera are installed securely.
D-Link DCS-6112 /6113 User Manual

Attaching the Enclosure

Plate A
21