D-Link DCS-6112 User Manual page 58

Configuration
Event Settings
Under Event Settings, click Add to open the Event Settings page. You can arrange three
elements -- Trigger, Schedule, and Action to define an event. A total of three event
settings can be configured.
Event name: Enter a name for the event.
Enable this event: Check the box to activate this event.
Priority: Set the priority for this event (High, Normal, or Low). The event with higher
priority will be executed first
Detect next event after __ seconds: Select the delay time before selecting the next
event. It is used for both events of motion detection and digital input trigger.
Trigger
This is the cause or stimulus which defines when to trigger the event. The trigger
source can be configured to use the camera's built-in motion detection mechanism
or external digital input devices. There are several choices of trigger sources as shown
below. Select the item to display the corresponding configuration options.
Video motion detection: This option makes use of the built-in motion detection
mechanism as a trigger. To enable this function, you need to first configure a Motion
Detection Window. For more information, refer to "Motion Detection" on page 51.
Periodically: This option allows the camera to trigger periodically for every other
defined minute. Up to 999 minutes are allowed.
Digital input: This option allows the camera to use an external digital input device
or sensor as a trigger source. Depending on your application, there are many choices
of digital input devices on the market which helps to detect changes in temperature,
vibration, sound, and light, etc.
D-Link DCS-6112 /6113 User Manual 58