Network; Ip Settings - D-Link DCS-6112 User Manual

Configuration
IPv4
LAN: Select this option when the camera is deployed on a local area network (LAN)
and is intended to be accessed by local computers. The default setting for the
Network Type is LAN. (If you select PPPoE, skip to the instructions on the next page.)
• Get IP address automatically (DHCP): Select this option if you have a DHCP
server running on your network and would like a dynamic IP address to be
assigned to the camera automatically.
• Use fixed IP address: Select this option if you want a static or fixed IP address for
your camera. Then complete the fields listed below:
IP Address: Enter an IP address.
Subnet Mask: The default value is 255.255.255.0. This helps to determine if the
designated IP address is on the same subnet.
Default Router: This is the gateway used to forward frames to destinations in
a different subnet. (Invalid router setting will cause the transmission to fail if its
destination is in a different subnet).
Primary DNS: The Primary Domain Name Server (DNS) that translates hostname
into IP address.
Secondary DNS: Secondary Domain Name Server (DNS) that backs up the Primary
DNS.
Primary WINS Server: The primary WINS server that maintains the database for
computer name and IP address.
Secondary WINS Server: The secondary WINS server that maintains the database
for computer name and IP address.
D-Link DCS-6112 /6113 User Manual

Network

IP Settings

37