D-Link DCS-6111 Quick Install Manual

Fixed dome day & night network camera w/ wdr sensor
Hide thumbs Also See for DCS-6111:

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-6111

  • Page 2: Minimum System Requirements

    WDR D&N FIXED DOME Network Camera Ver. 1.00 DCS-6111 AC Power Adapter CAT5 Ethernet Cable CD-ROM with Manual and Setup Wizard Screws and I/O Screwdriver Connector If any of the above items are missing, please contact your reseller. D-Link DCS-6111 Quick Install Guide...
  • Page 3: Hardware Overview

    Press and hold the reset button until the Power LED flashes through its cycle twice. This will reset the camera to its factory default settings. Connections DC Power Connector Receptor for the supplied power adapter. D-Link DCS-6111 Quick Install Guide...
  • Page 4 Hardware Overview Focus Controller Zoom Controller Adjustment Screw Tilt Screw DI / DO Pan Screw LEDs Power/Activity LED D-Link DCS-6111 Quick Install Guide...
  • Page 5: Hardware Installation

    Insert the supplied plastic anchors into the drilled holes, and align the holes at the base of the camera with the plastic anchors. Once aligned, insert the provided screws through the holes. Use screwdriver to tighten and secure. D-Link DCS-6111 Quick Install Guide...
  • Page 6: Network Deployment

    Connection with a PoE Switch If using a PoE switch or router, connect the IP camera via Ethernet cable, which will provide both power and data transmission over a single cable. D-Link DCS-6111 Quick Install Guide...
  • Page 7: Software Installation

    Software Installation Turn on the computer and insert the D-Link DCS-6111 Autorun CD into the CD-ROM drive. The following step-by-step instructions displayed are shown when using Windows Vista The steps and screens are similar when using other Windows operating systems.
  • Page 8 To start the installation click Install. Note: The installation may take several minutes to complete. Click Install Click Finish to complete the installation. Click Finish D-Link DCS-6111 Quick Install Guide...
  • Page 9 Windows Start menu. The Installation Wizard will appear and show the MAC address of your DCS-6111 and an IP Address (which may or may not be correct depending on what you have your DCS-6111 connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here.
  • Page 10 IP address every time the camera starts up. Click Next to continue. Click Next Select UPnP Port Forwarding if your router supports this function. If not, choose Manual to manually enter your port numbers. Click Next to continue. Click Next D-Link DCS-6111 Quick Install Guide...
  • Page 11 Click Next to continue. Click Next A window will pop up asking you if you want to access the DCS-6111 via mobile phone. Clicking Yes will set the video resolution to 176x144. Click Yes Click Apply to apply the settings listed in the window to the device.
  • Page 12 Click Add to my favorite to save the address and then click Exit to complete the installation. Click Exit Double-click the DCS-6111 to launch the camera’s web configuration page. Note: Please see the user manual for more information. D-Link DCS-6111 Quick Install Guide...
  • Page 13 Click OK to continue. This section shows your camera’s live video. You may control the settings using the buttons at the bottom. For more information on using the web configuration, please refer to the user manual. D-Link DCS-6111 Quick Install Guide...
  • Page 14: Adjusting The Lens

    Tighten the zoom controller once completed. Loosen the focus controller and adjust the focus range by moving the controller left and right until the image is clear. Tighten the focus controller once completed. D-Link DCS-6111 Quick Install Guide Loosen Tighten Loosen Tighten...
  • Page 15: Attaching The Enclosure

    Note: When attaching the ring enclosure, be sure to first align the line on the ring enclosure with the triangle on the dome enclosure. When attachment is successfully made, the line on the ring enclosure will be aligned with the line on the dome enclosure. D-Link DCS-6111 Quick Install Guide...
  • Page 16: D-Viewcam Installation

    D-ViewCam Installation D-ViewCam software is included for the administrator to manage up to 32 D-Link IP cameras remotely. The administrator can use the software to configure the advanced settings for the camera. D-ViewCam is a complete management tool and includes all configurative settings.
  • Page 17 Click Browse if you would like to choose a specific folder for the installation, otherwise click Next to continue. Click Next Click Next to start the installation. Note: The D-ViewCam installation process may take several minutes to complete. Click Next D-Link DCS-6111 Quick Install Guide...
  • Page 18 D-ViewCam Installation Click Finish to complete the installation. Click Finish D-Link DCS-6111 Quick Install Guide...
  • Page 19: Add A Camera

    Adding a Camera Add a Camera To start D-ViewCam, click on Start > All Programs > D-Link > D-Link D-ViewCam Use admin as the default user name and leave the password blank. Click the to continue. The D-ViewCam screen will appear as shown below. Click (Next) to begin the Add Camera wizard.
  • Page 20 If you choose Add Manually, enter the IP address, Device Port, Model Name, Camera ID and Password. Click the “?” button to auto detect the camera’s model name, then the model name will appear in the Model Name box. D-Link DCS-6111 Quick Install Guide...
  • Page 21 (06:00 PM to 08.00 AM), and ONLY record when motion is detected. Note: Excluding 24/7 Continuous Recording, other schedule recording types can ONLY do recording when motion is detected. Please refer to the user manual for more information. D-Link DCS-6111 Quick Install Guide...
  • Page 22 D-ViewCam Installation Select Yes to add another camera, or select No to continue. Note: After you have finished adding your camera(s), click Close to view your camera(s). Your D-ViewCam Installation is Complete! D-Link DCS-6111 Quick Install Guide...
  • Page 23 Notes Notes D-Link DCS-6111 Quick Install Guide...
  • Page 24: Technical Support

    Copyright ©00 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.

Table of Contents