Client Settings - D-Link DCS-6112 User Manual

Configuration
Click on the Client Settings button
your DCS-6112/DCS-6113.
H.264/MPEG4 Media Options
Video and Audio can be viewed at the same time, or each can be viewed separately.
H.264/MPEG4 Protocol Options
Select a protocol from the following choices:
• UDP Unicast - User Datagram Protocol using a one-to-one connection (streaming
to a single computer)
• UDP Multicast - User Datagram Protocol using a one-to-many connection
(streaming to multiple computers)
• TCP - Transmission Control Protocol, which provides higher quality video streaming
than UDP. TCP includes error-checking, so it is more reliable, but not as fast as UDP.
• HTTP - Hypertext Transfer Protocol, which offers the highest image and video
quality. However, packet loss will diminish image quality when bandwidth
becomes restricted.
HTTP and UDP Considerations: If the network is protected by a firewall and it opens only HTTP port (80), HTTP protocol must be selected. In
this mode, audio is disabled and only video can be viewed. UDP connections will not be available to remote users if all four ports have not been
forwarded. Only the HTTP port must be forwarded for remote users to make an HTTP connection (video only). For details about ports forwarded
and streaming options refer to
MP4 Saving Options
Folder: Click on Browse and select the folder where you would like the MP4 file saved on your desktop computer.
File name prefix: Enter a file name prefix for the MP4 files.
Add date and time suffix to file name: Check the box if you would like the date and time to be added to the end of each filename.
Local Streaming Buffer Time
Enter the buffer time in milliseconds. The buffer will cause a slight delay between live activity and the video of the live stream but may increase
the quality of video.
D-Link DCS-6112 /6113 User Manual

Client Settings

to configure the basic protocol options for
"Port and Access Name Settings" on page 40.
26