D-Link DCS-6112 User Manual

D-Link DCS-6112 User Manual

Fixed dome network camera
Hide thumbs Also See for DCS-6112:

Advertisement

Version 2.0 | 07/15/2014

User Manual

Fixed Dome Network Camera
DCS-6112/DCS-6113

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-6112

  • Page 1: User Manual

    Version 2.0 | 07/15/2014 User Manual Fixed Dome Network Camera DCS-6112/DCS-6113...
  • Page 2: Manual Revisions

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description October 11,2011 DCS-6112/6113 Revision A1 with firmware version 1.0 July 15, 2014 DCS-6112/6113 Revision B1 with firmware version 2.0...
  • Page 3: Table Of Contents

    Audio & Video ..............30 User Settings ..............66 Video Settings ..............30 Device Settings ..............67 Image Settings ..............33 Time and Date ..............68 Audio Settings ..............35 Maintenance ..............69 Day and Night Settings* ..........36 Parameter List ..............71 *Only applies to the DCS-6113. D-Link DCS-6112 /6113 User Manual...
  • Page 4 Logs ..................72 Appendix A - Technical Specifications ......73 Appendix B - Contacting Technical Support ....75 Appendix C - Warranty ............76 Appendix D - Registration ..........82 D-Link DCS-6112 /6113 User Manual...
  • Page 5: Product Overview

    Product Overview Package Contents DCS-6112 /DCS-6113 Fixed Dome Network Camera Mounting Screws Video Out Power Cable Cable Tie Power Adapter Alignment Sticker Ethernet Cable User Manual and Software on CD-ROM Security Screw Driver Quick Install Guide If any of the above items are missing, please contact your reseller.
  • Page 6: Minimum Requirements

    ƒ VGA card resolution: SVGA or XGA (1024x768 or above) ƒ A 10/100 Ethernet-based network ƒ A microSD memory card (optional) is required for recording to onboard storage ƒ Broadband Internet connection (for remote access) D-Link DCS-6112 /6113 User Manual...
  • Page 7: Introduction

    ICR filter allows the camera to capture crisp color images during the daytime and detailed gray scale images at night or in or low-light conditions. The included D-Link D-ViewCam™ is sophisticated software which allows users to manage up to 32 network cameras, set e-mail alert notifications, create recording schedules, and use motion detection to record directly to a hard drive.
  • Page 8: Features

    The DCS-6112 /DCS-6113 includes input and output ports for connectivity to external devices such as IR sensors, switches, and alarm relays. The DCS-6112 /DCS-6113 also incorporates Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power cabling.
  • Page 9: Hardware Overview

    Product Overview Hardware Overview Dome Cover Camera Housing D-Link DCS-6112 /6113 User Manual...
  • Page 10 4. Audio input Video output connector for 5. GND 1. Ground of Video out TV/Monitor 6. Digital input 2. Video output 7. Digital output 3. Ground of DC input 8. 12V DC 4. DC 12V D-Link DCS-6112 /6113 User Manual...
  • Page 11: Installation

    5. The camera can be mounted with the cable routed through the ceiling, wall or from the side. 6. Insert the provided screws through the holes. Use a screwdriver to tighten and secure the camera. D-Link DCS-6112 /6113 User Manual...
  • Page 12 Connect the network camera to a switch or router with an Ethernet cable. Then connect the supplied power cable from the camera to a power outlet. Connection with a PoE Switch If using a PoE switch, connect the network camera to the switch with an Ethernet cable, which will provide both power and data transmission over a single cable. D-Link DCS-6112 /6113 User Manual...
  • Page 13: Configuration With The Wizard

    Insert the DCS-6112/DCS-6113 CD into your computer's CD-ROM drive to begin the installation. If the autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.
  • Page 14 This screen will display a path to the destination folder for the installation files. Click Browse to select a different location, or click Next to proceed with installation. Note: The installation may take several minutes to finish. D-Link DCS-6112 /6113 User Manual...
  • Page 15 You will see this screen when the Setup Wizard has finished installing. Click Finish to complete the process. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > Programs > D-Link > Setup Wizard SE...
  • Page 16 IP 192.168.0.20 will be displayed. Click the Wizard button to continue. Enter the Admin ID and Password. When logging in for the first time, the default Admin ID is admin with the Password left blank. Click Next, to proceed. D-Link DCS-6112 /6113 User Manual...
  • Page 17 Select Static IP if the camera will use the same IP address each time it is started. Click Next, to proceed. The Setup Wizard is finished. Take a moment to confirm your settings are correct. Click Restart to save your settings and reboot the DCS-6112/DCS-6113. D-Link DCS-6112 /6113 User Manual...
  • Page 18: Viewing Live Video Using A Web Browser

    Installation Viewing Live Video Using a Web Browser Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > Programs > D-Link > Setup Wizard SE Under Device Name, select DCS-6112 or DCS-6113 and then click Link to access the web configuration.
  • Page 19 Enter admin as the default username and leave the password blank. Click OK to continue. View your camera’s live video from this screen. You can select your video profile and operate the camera. For additional information, refer to "Live Video" on page D-Link DCS-6112 /6113 User Manual...
  • Page 20: Adjust The Viewing Angle

    3. Use a small Phillips screwdriver to loosen the two screws behind the lens collar. Rotate the lens to adjust the network camera’s image until the desired orientation is achieved. Tighten the screws once adjustment is completed. Loosen Tighten Pan 350° Rotate 350° Tilt 85° D-Link DCS-6112 /6113 User Manual...
  • Page 21: Attaching The Enclosure

    3. Attach the dome cover to the camera as the shown to the right. The dome cover cannot be attached if the angle is not correct. 4. Finally, make sure all parts of the camera are installed securely. D-Link DCS-6112 /6113 User Manual...
  • Page 22: Configuration

    When you connect to the camera's web interface you will see the following page. This is the Live Video page which will allow you to view the camera's video feed and control basic camera functions using the icons on this screen. Refer to the tables on the following pages for detailed information about these icons. D-Link DCS-6112 /6113 User Manual...
  • Page 23 Configuration Click the D-Link logo to visit the D-Link website. D-Link Logo The logo and website can be customized to fit your needs. For more information, refer to "User Customization" on page Securicam Logo Setup the stream transmission mode and saving options on the local computer.
  • Page 24 Stop: Stop, Pan and Tilt. Preset: Select from the preset drop-down list to quickly move the camera to the desired preset position. Go Preset Control Pan/Tilt/Zoom speed: Pan Speed Control Tilt Speed Control Zoom Speed Control Speed Control D-Link DCS-6112 /6113 User Manual...
  • Page 25: Camera Control

    50%: Keep the video zoom ratio at 50% 25%: Keep the video zoom ratio at 25% Click Help to view the detailed information regarding camera setup to help you solve any problems you encounter. Help D-Link DCS-6112 /6113 User Manual...
  • Page 26: Client Settings

    Add date and time suffix to file name: Check the box if you would like the date and time to be added to the end of each filename. Local Streaming Buffer Time Enter the buffer time in milliseconds. The buffer will cause a slight delay between live activity and the video of the live stream but may increase the quality of video. D-Link DCS-6112 /6113 User Manual...
  • Page 27: Setup

    Configuration Setup The DCS-6112 /DCS-6113 has both basic and advanced setup screens. These screens include a tree view with multiple setup options. Basic Setup Click on the setup button to enter the setup screen. Click on the basic button to enter the basic setup screen.
  • Page 28: Advanced Setup

    Recording - Recording Settings, Local Storage PTZ Control - Digtal PTZ (pan-tilt-zoom) User Customization - Live Video Page Config, HTML Code Examples System - User Settings, Device Settings, Time and Date, Maintenance, Parameter List, Logs D-Link DCS-6112 /6113 User Manual...
  • Page 29: System Overview

    For more information about adjusting the camera's settings, refer to the following: "Audio & Video" on page 30 "Network" on page 37 "Event Management" on page 51 "Recording" on page 60 "PTZ Control" on page 63 "User Customization" on page 64 "System" on page 66 D-Link DCS-6112 /6113 User Manual...
  • Page 30: Audio & Video

    Output Frame Size (size of the live view window). Stream 4: This is a global view stream that captures the full view of the video. Users can define the Output Frame Size (size of the live view window). D-Link DCS-6112 /6113 User Manual...
  • Page 31 2. Select the applied mode: Day mode, Night mode, or Schedule mode. If you choose Schedule mode enter a range of time in hours and minutes. 3. Configure Exposure setting in the second column. 4. Click Save to enable the setting and click Close to exit the page. D-Link DCS-6112 /6113 User Manual...
  • Page 32 Customize and manually enter a value. • Fixed quality: The video quality can be adjusted by selecting one of the following: Medium, Standard, Good, Detailed and Excellent. You can also select Customize and manually enter a value. D-Link DCS-6112 /6113 User Manual...
  • Page 33: Image Settings

    2. Place a sheet of white paper in front of the lens, then allow the camera to adjust the color temperature automatically. 3. Select Fixed to confirm the setting while the white balance is being measured. 4. Click Save to enable the new settings. D-Link DCS-6112 /6113 User Manual...
  • Page 34 4. Check the box to Enable privacy mask. Notes: • Up to five privacy mask windows can be set up on the same screen. • To delete the privacy mask window, click the X at the upper right-hand corner of the window. D-Link DCS-6112 /6113 User Manual...
  • Page 35: Audio Settings

    AAC bit rate: Select an AAC bit rate from the drop-down list. Higher bit rate means higher audio quality, although it takes more network bandwidth to transmit. G.711: Select between uLAW (G.711) and ALAW (G.711) compression formats. A higher audio quality will require more bandwidth. D-Link DCS-6112 /6113 User Manual...
  • Page 36: Day And Night Settings

    Light Sensor Sensitivity: Select Low, Normal, or High sensitivity for the light sensor. Disable IR LED: Check the box if you want to disable the IR LED. By default, the IR LED automatically switches on at night. * Day & Night function is for DCS-6113 only. D-Link DCS-6112 /6113 User Manual...
  • Page 37: Network

    DNS. Primary WINS Server: The primary WINS server that maintains the database for computer name and IP address. Secondary WINS Server: The secondary WINS server that maintains the database for computer name and IP address. D-Link DCS-6112 /6113 User Manual...
  • Page 38 4. Go to Setup > Network > IP settings. Select PPPoE and enter the User name and Password provided by your ISP. Click Save to enable the setting. 5. The camera will reboot. 6. Disconnect the power to the camera. Remove it from the LAN environment. D-Link DCS-6112 /6113 User Manual...
  • Page 39 3. Press Enter on the keyboard or click Refresh button to refresh the web page. Manually Setup the IP Address: Check the box to manually configure IPv6 settings if your network environment does not have DHCPv6 server and advertisement- enabled routers. D-Link DCS-6112 /6113 User Manual...
  • Page 40: Port And Access Name Settings

    To access the camera on the LAN, both the HTTP port and Secondary HTTP port can be used. For example, when the HTTP port is set to 80 and the Secondary HTTP port is set to 8080, you can access the camera using the example links below: http://192.168.0.20 or http://192.168.0.20:8080 D-Link DCS-6112 /6113 User Manual...
  • Page 41 If basic authentication is selected, the password is sent in plain text format, but there can be potential risks of it being intercepted. If digest authentication is selected, user credentials are encrypted using MD5 algorithm, thus providing better protection against unauthorized access. D-Link DCS-6112 /6113 User Manual...
  • Page 42 When the multicast RTP port changes, the corresponding multicast RTCP port will change accordingly. Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the range a packet can be forwarded. D-Link DCS-6112 /6113 User Manual...
  • Page 43: Dynamic Dns

    User name: Enter your User name or e-mail used to connect to the DDNS Password: Enter your Password used to connect to the DDNS server. Status: Displays the connection Status, which is automatically determined by the system. Click Save to save your settings. D-Link DCS-6112 /6113 User Manual...
  • Page 44: Https

    2. Certificate Information will be displayed in the third column as shown to the right. Click Property to view more detailed information about the certificate. Create Certificate Request and Install Select this option to create a certificate from a certificate authority. D-Link DCS-6112 /6113 User Manual...
  • Page 45 If you want to create and install other certificates, you should remove the existing one. To remove the signed certificate, uncheck Enable HTTPS secure connection in the first column and click Save. Then click Remove to erase the certificate. D-Link DCS-6112 /6113 User Manual...
  • Page 46: Access List

    Disconnect: If you want to break off the current connections, select them and click the disconnect button. The selected connections will only be disconnected temporarily and will automatically try to re-link again (i.e. Internet Explorer or Quick Time Player). D-Link DCS-6112 /6113 User Manual...
  • Page 47 Administrator IP address Always allow the IP address to access this device: Check the box and then add the Administrator’s IP address in the provided field to make sure the Administrator can always connect to the device. D-Link DCS-6112 /6113 User Manual...
  • Page 48: Advanced Settings

    IEEE 802.1x Check the box to enable if your network environment uses IEEE 802.1x, which is a port-based network access control. The network devices, intermediary switch/access point/hub, and RADIUS server must support and enable 802.1x settings. D-Link DCS-6112 /6113 User Manual...
  • Page 49 To utilize QoS in a network environment, the following requirements must be met: • All network switches and routers in the network must include support for QoS. • The network video devices used in the network must be QoS-enabled. D-Link DCS-6112 /6113 User Manual...
  • Page 50 (discarding the packet) decisions. Routers at each network node classify packets according to their DSCP value and give them a particular forwarding treatment. For example, determining how much bandwidth should be reserved. D-Link DCS-6112 /6113 User Manual...
  • Page 51: Event Management

    4. Click Save to apply the changes. situations, and Profile 2 for special situations that may 5. Check the box to Enable motion detection. require Schedule mode or Night mode*. * Night mode applies to the DCS-6113 only. D-Link DCS-6112 /6113 User Manual...
  • Page 52: Tamper Detection

    Set up the event source as Camera Tampering Detection on Event Settings > Server Settings (how to send alarm message)/ Media Settings (send what type of alarm message). Refer to "Event Settings" on page D-Link DCS-6112 /6113 User Manual...
  • Page 53: Di And Do

    Configuration DI and DO The DCS-6112/DCS-6113 provides a general I/O terminal block with one digital input and digital output for device control. The I/O connector provides the physical interface for digital input (DI+, GND) and digital output (DO-, +12V) that is used for connecting a diversity of external alarm devices to the camera such as IR-Sensors and alarm relays.
  • Page 54: Event Settings

    To verify if the e-mail settings are correctly configured, click Test. The result will be shown in a pop-up window. If successful, you will also receive an e-mail indicating the results of your test. Click Save to enable the settings, then click Close to exit the page. D-Link DCS-6112 /6113 User Manual...
  • Page 55 Network storage: Select to send the media files to a network storage location when a trigger is activated. Click Save to enable the settings then click Close to exit the page. When completed, the new server settings will automatically be displayed on the Event Settings page. D-Link DCS-6112 /6113 User Manual...
  • Page 56 File name prefix: Enter the text that will be appended to the front of the file name. Add date and time suffix to the file name: Check the box to add a date/time suffix to the file name. Click Save to enable the settings, then click Close to exit the page. D-Link DCS-6112 /6113 User Manual...
  • Page 57 System log: Select to send a system log when a trigger is activated. When completed, click Save to enable the settings and click Close to exit this page. The new media settings will appear on the Event Settings page. D-Link DCS-6112 /6113 User Manual...
  • Page 58 Digital input: This option allows the camera to use an external digital input device or sensor as a trigger source. Depending on your application, there are many choices of digital input devices on the market which helps to detect changes in temperature, vibration, sound, and light, etc. D-Link DCS-6112 /6113 User Manual...
  • Page 59 (i.e. specify the server to send the media files to) when a trigger is activated. • Add Server: same as Server Settings • Add Media: same as Media Settings D-Link DCS-6112 /6113 User Manual...
  • Page 60: Recording

    Capacity: You can choose either the entire free space available or limit the reserved space. The recording size limit must be larger than the reserved amount for cyclic recording. File name prefix: Enter the text that will be appended to the front of the file name. D-Link DCS-6112 /6113 User Manual...
  • Page 61 Network Storage. The new recording name will appear in the drop-down list on the recording page. To remove a recording setting from the list, select a recording name from the drop- down list and click Delete. D-Link DCS-6112 /6113 User Manual...
  • Page 62: Local Storage

    Search Results This area will display the search results. There are four columns: Trigger time, Media type, Trigger type, and Locked. Click the up and down arrows to sort the search results in either direction. D-Link DCS-6112 /6113 User Manual...
  • Page 63: Ptz Control

    5. If you want to delete a selected location, select it from the Source List and click Remove. 6. Select a location and click Up or Down to rearrange the patrol order. 7. Click Save to enable the settings. D-Link DCS-6112 /6113 User Manual...
  • Page 64: User Customization

    5. The selected color will be displayed in the corresponding fields and in the Preview column. Click Save to enable the settings. DCS-6112B1 Title: You can enter a Title, Font color, Font size, and/or Font style to change the title at the top of your Live Video page. D-Link DCS-6112 /6113 User Manual...
  • Page 65: Html Code Examples

    If target remote user client uses other browser, then the example code can only support MJPEG stream. Still Image Format: • Refresh interval second: If user only needs to embedded still image in the browser, use this option and setup the refresh interval of the still image. D-Link DCS-6112 /6113 User Manual...
  • Page 66: System

    User name: Enter a user name for the new account. Password: Enter a password for the new account. Privilege: Select the access rights for the new user. Manage user: Manage the accounts for existing users. Authentication: Select access rights for existing users. D-Link DCS-6112 /6113 User Manual...
  • Page 67: Device Settings

    Turn off the LED indicator: Check the box to turn off the LED next to the lens. This will prevent anyone from observing the operation of the network camera. Camera Name: Create a unique name for your camera. DCS-6112B1 D-Link DCS-6112 /6113 User Manual...
  • Page 68: Time And Date

    Set the date and time manually: Set the time and date manually. (Enter the Year, Month, Day, Hour, Minute, and Second.) Copy Your Computer’s Time Setting: Click to synchronize the time information from your PC. D-Link DCS-6112 /6113 User Manual...
  • Page 69: Maintenance

    3. Open the file with Microsoft ® time and end time of DST. 4. When completed, click Save to save the file. Upload daylight saving time rules: Click Browse… and specify the XML file to upload. D-Link DCS-6112 /6113 User Manual...
  • Page 70 Note: Do not power off the camera during the upgrade! Follow the steps below to upgrade the firmware: 1. Download the latest firmware file from the D-Link website. The file is in .pkg file format. 2. Click Browse… and select the firmware file.
  • Page 71: Parameter List

    Configuration Parameter List The Parameters List page lists the entire system’s parameters in alphabetical order. If you request technical assistance, be prepared to provide the information listed on this page. D-Link DCS-6112 /6113 User Manual...
  • Page 72: Logs

    4. Click Save to save your settings. Current Log: This column displays the system logs in chronological order. The system logs are stored in the camera’s buffer area and will be overwritten when reaching a certain limit. D-Link DCS-6112 /6113 User Manual...
  • Page 73: Appendix A - Technical Specifications

    ƒ MPEG-4 AAC Network IPv4, IPv6, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP/HTTPS, Network Protocols Samba Client, PPPoE, UPnP Port Forwarding, RTP/RTSP/RTCP, IP filtering, LLTD, CoS/QoS, SNMP, IGMP, 802.1x Security ƒ...
  • Page 74 -20 to 70 ˚C (-4 to 158 ˚F) Humidity 90% non-condensing Vandal-proof IK-10 standard (DCS-6113V) 466 g (1.03 lbs) (DCS-6112) Weight 472 g (1.04 lbs) (DCS-6113) 578 g (1.27 lbs) (DCS-6113V) Certifications CE (Class A), CE LVD (EN60965-1), FCC (Class A), ICES-003, C-Tick...
  • Page 75: Appendix B - Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
  • Page 76: Appendix C - Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 77 D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s...
  • Page 78 • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
  • Page 79 Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer.
  • Page 80 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DCS-6112 /6113 User Manual...
  • Page 81: Industry Canada Statement

    Appendix C - Warranty For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 82: Appendix D - Registration

    Appendix D - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.0 July 15, 2014 D-Link DCS-6112 /6113 User Manual...

This manual is also suitable for:

Dcs-6113

Table of Contents