D-Link DCS-6112 User Manual page 39

Configuration
IPv6
Enable IPv6: Check the box and click Save to Enable IPv6. This only works if your
network environment and hardware support IPv6. Your browser should be Internet
Explorer 7 or above, or Mozilla Firefox 3.5 or above.
With IPv6 enabled, by default, the camera will listen to router advertisements and be
assigned a link-local IPv6 address accordingly.
IPv6 Information: Click this button to obtain the IPv6 information. If your IPv6
settings are correct, the IPv6 address list will be listed in the pop-up window.
Follow the steps below to link to an IPv6 address:
1. Open your web browser.
2. Enter the link-global or link-local IPv6 address in the address bar of your web
browser.
3. Press Enter on the keyboard or click Refresh button to refresh the web page.
Manually Setup the IP Address: Check the box to manually configure IPv6 settings
if your network environment does not have DHCPv6 server and advertisement-
enabled routers.
D-Link DCS-6112 /6113 User Manual 39