D-Link DCS-6112 User Manual page 56

Configuration
Media Settings
Click Add to open the Media Settings page. On this page, you can specify the type
of media that will be sent when a trigger is activated. A total of 5 media settings can
be configured.
Media name: Enter a name for the media setting.
Media Type: There are three choices of media types available: Snapshot, Video Clip,
and System log. Select one to display the corresponding configuration options. You
can configure one or all three of them.
Snapshot: Select to send snapshots when a trigger is activated.
Source: Select a source for taking snapshots, from streams 1 ~ 4.
Send pre-event images: The camera has a buffer area. It temporarily holds data up
to a certain limit. Enter a number to decide how many images to capture before a
trigger is activated. Up to seven images can be generated.
Send post-event images: Enter a number to decide how many images to capture
after a trigger is activated. Up to seven images can be generated.
File name prefix: Enter the text that will be appended to the front of the file name.
Add date and time suffix to the file name: Check the box to add a date/time suffix
to the file name.
Click Save to enable the settings, then click Close to exit the page.
D-Link DCS-6112 /6113 User Manual 56