Tightening Torque (Danm); Limited Warranty - OREC LS 280 Owner's Manual

TIGHTENING TORQUE (daNm)

Use the chart below to tighten screws, bolts and nuts without other specifications
DIAMETER
of
The screw
Or without mark
(mm)
3 0 ,3 to 0 ,5
4 0 ,8 to 1 ,0
5 2 ,5 to 3 ,4
6 4 ,9 to 6 ,9
8 11,8 to 16,7
10 20,6 to 29,4
12 44,1 to 53,9
14 63,7 to 78,5
16 88,3 to 107,9
18 117,7 to 137,3
20 147,1 to 166,71
22 176,5 to 205,9
24 235,4 to 264,8
Each new product manufactured by OREC is guaranteed under the cope of the following terms. The
warranty applies to defective parts due to defect in assembling and construction or/and in material
imputable to us. It is valid for a period of one year and for normal use of the machine. It does not apply to
engines manufactured by other companies that also guarantee their materials and whose guarantee is
supplied with the machine.
1° This guarantee is limited to the sole replacement of the defective parts during one year commencing
with the purchasing date of the machine. The guarantee is limited to the parts that are previously shown
to and acknowledged by OREC.
2° Each part concerned by a guarantee claim must be returned to OREC's in order to be inspected,
repaired or replaced. The part(s) must be returned with freight prepaid and must be accompanied with a
proof of the purchase. The part(s) must be packed with the greatest of care to ensure their protection.
3° The machine must not have been worn out, repaired or maintained by anyone without OREC's
previous authorization. The machine must not have been damaged in a road accident, roughly handled or
unproperly used.
This guarantee does not compell OREC or its dealer to reimburse the labour costs or the carriage costs to
the repairer.
NO OTHER GUARANTEE SHALL BE APPLIED TO THIS MACHINE EXCEPT THE LEGAL
GUARANTEE. OREC SHALL NOT BE LIABLE FOR ANY DAMAGE OR COST INVOLVED BY THE
MACHINE, FOR EXAMPLE :
1. HIRING COSTS
2. TURNOVER LOSSES
3. WORK DONE BY A REPLACING MACHINE
OREC DOES NOT TAKE ON ANY OTHER OBLIGATION AND DOES NOT AUTHORIZE ANYBODY TO
TAKE ON ANY OTHER OBLIGATION THAN THOSE MENTIONED IN THE 3 PARAGRAPHS ABOVE.
To know the name of your dealer, report to: OREC
© SAT – 09/2006
Tightening torque following the marks on the screw head
4
7
---
---
5 ,4 to 6 ,4
9 ,8 to 11 ,8
24,5 to 29,4
39,2 to 44,1
83,4 to 93,2
117,7 to 132,4
152 to 171,6
205,9 to 235,4
235,4 to 274,6
421,7 to 451,1
539,4 to 568,8

LIMITED WARRANTY

www.orec-jp.com
8
---
---
6 ,4 to 7 ,4 6 ,4 to 7 ,4
11,8 to 13,7 11,8 to 13,7
29,4 to 34,3 34,3 to 36,2
49 to 53,9 49 to 53,9
93,2 to 107,9 93,2 to 107,9
132,4 to 147,1 147,1 to 166,7
176,5 to 196,1 215,8 to 245,2
245,2 to 274,6 313,8 to 343,2
313,8 to 353 441,3 to 480,5
539,4 to 578,6 608 to 647,2
706,1 to 745,3 784,5 to 823,8
32
9 11
--- ---
--- ---
8 ,8 to 9 ,8
14,7 to 16,7
36,3 to 41,2
72,6 to 82,4
122,6 to 137,3
205,9 to 225,6
313,8 to 343,2
441,3 to 470,7
617,8 to 657,1
843,4 to 882,6
1098,4 to 1137,6