Check List; Safety Rules - OREC LS 280 Owner's Manual

INSTRUCTIONS TO THE DEALER
• The assembling, the installation and the first application of the machine is under the OREC dealer's
responsability.
• Read the instruction manual as well as the safety measures. Check that all the before delivery and at
delivery check points specified in the following lists have been verified and possibly modified before
delivering the machine to its owner.
CHECKS BEFORE DELIVERY
• Check that all the shields, grids and safety guards are in place and in a good state.
• Check that the hydraulic hoses are in place and in a good state. Replace them if necessary.
• Check that there is no oil leak, repair if necessary.
• Check that the safety instruction stickers are in place and in a good state. Replace them if necessary.
• Check that all the bolts and screws are properly tightened with the right torque (refer to page 16).
• Protect the grease nipples by coating them with grease and lubricate the machine.
• Check that the machine can work properly.
Especially Braking system ,Driving system is important to check.
CHECKS ON DELIVERY
• Show the user how to perform the adjustments.
• Explain to the user the importance of the lubrication and show him the different greasing points on the
machine.
• Show him the safety devices, grids, guards and the optional equipments.
• Give the instruction manual to the customer, ask him to read it carefully.
Some of the illustrations show the machine with no guard, no shield. Never use the machine
without these devices.
Learn to stop the machine in case emergency.
•
Read this manual.
•
Do not let anybody use the machine before having read and understood this manual.
•
Do not let children use the machine.
•
Do not wear loose clothes. They might be grasped by moving parts.
•
Always wear protection equipments for when using the machine.
•
Only work during daylight or with a good artificial light.
•
Check that the safety instruction stickers are in place and in a good condition.
•
Keep the machine free from debris or mud.
•
Check that the machine can work properly before any use.
•
Check that all the shields, grids and safety guards are in place and in a good state.
•
It is strictly forbidden to carry persons or animals onto the machine during the work or during the
•
transportation.
© SAT – 09/2006

CHECK LIST

SAFETY RULES

CAUTION
4