Print Options And Override Hierarchy; Default Settings - Canon iRC2100 Printing Manual

A
A-2 Print Options
• From the job's Properties or Override Print Settings dialog box, available
from Command WorkStation, Fiery WebSpooler, or Fiery Spooler
To change a job's settings from the Command WorkStation, right-click the
job and select Properties, or double-click the job to display the Properties
dialog box. To change job settings from Fiery WebSpooler and from Fiery
Spooler, double-click a job to display the Override Print Settings dialog
box. For more information, see the Job Management Guide.

Print options and override hierarchy

The override hierarchy is as follows:
• Job settings made from the user's printer driver override the
iR C2100/2100S Setup and ColorWise Pro Tools settings.
• Job settings made from Command WorkStation, Fiery WebSpooler, or
Fiery Spooler override the user's printer driver settings.

Default settings

In the following table, underlined settings in the "Option and settings"
column indicate default printer driver settings (PPD defaults). In other
words, if you do not use the printer driver interface to configure a particular
option, the iR C2100/2100S prints the job with the underlined setting.
For options that can be configured during Setup from the Control Panel,
Command WorkStation, ColorWise Pro Tools, or WebSetup, choosing
Printer's default
Setup setting specified. For options that cannot be configured during Setup,
the iR C2100/2100S prints the job with a pre-configured "Printer's default"
setting. For more information, see the "Requirements, constraints, and
information" column.
To find out about the current Setup defaults, print the Configuration page
from the Command WorkStation or from the iR C2100/2100S Control
Panel.
results in the iR C2100/2100S printing the job with the