Canon iRC2100 Printing Manual page 83

A
Option and settings:
(Default setting is underlined)
Stapler Mode
Off/1-Staple [Upper Left]/1-Staple
[Upper Right]/2-Staple
[Left]/2-Staple [Right]/2-Staple
[Top]/Saddle Stitch
Stapler Sorter-N1
Not Installed/Installed
Toner Reduction
Printer's default/Off/On
Transparency Interleaving
Off/Blank Interleave/
Printed Interleave
Secured Print
(0000-9999)
A-9 Print Options
Description:
Specify whether or not to staple the
job.
Specify if you would like to install the
Stapler Sorter-N1.
Specify whether or not to print the
current job with a maximum toner
value.
Select
Blank Interleave
multiple transparency sheets separated
by blank, plain paper pages.
Select
Printed Interleave
multiple transparency sheets separated
by printed, plain paper pages.
Specify secure printing by entering a
numeric password for job. A job that
has been assigned a password can only
be printed when its numeric password
is entered at the Control Panel.
Requirements, constraints,
and information:
If this option is set to
or
Left) 1-Staple (Upper Right)
Sorter Mode must be set to
.
Collate
See page A-19 for more information.
For Saddle Stitch, see the Saddle
Finisher Guide.
N : When this mode is selected
OTE
for printing using four colors, be sure
to use 105g/m
printing on any other kind of paper
may produce unexpected results.
This is an installable option.
For more information, see Getting
Started.
The
Printer's default
the setting specified in
iR C2100/2100S Setup.
For more information, see page A-20.
N : When Media Type is set to
OTE
Transparency
to On .
to print This option is supported with Letter,
A4R, LetterR, or A4 size plain paper
or transparencies only.
to print
Jobs using this feature do not appear
in the Fiery Spooler, Fiery
WebSpooler, or Command
WorkStation, however, they do appear
in the Job Log.
1-Staple (Upper
,
or
Sort
2
(28lb) paper. Duplex
setting reflects
, this option must be set