Canon iRC2100 Printing Manual page 17

1
1-5 Printing from applications
8. Click the Destination, Layout, Finishing, Watermarks, and Image Quality
print option bars to specify the appropriate settings for the print job.
These print options are specific to the iR C2100/2100S and the
copier/printer. They override settings in iR C2100/2100S Printer Setup, but
can be changed from Command WorkStation, Fiery WebSpooler, or
Fiery Spooler. For information about these options and overrides, see
Appendix A.
If you choose Printer's default, the job prints according to the settings entered
during Setup, or the default settings. See Appendix A for more information.
Some options listed in the printer driver could also be set from an
N :
OTE
application (for example, collation). In these cases, use the driver option to
perform the function, rather than setting it from the application. The
application may not set up the file properly for printing on the
iR C2100/2100S and may also take longer to process.
If you specify incompatible print settings, the Conflict dialog box may
N :
OTE
appear. Follow the on-screen instructions to resolve the conflict.
9. Click the Owner Information print option bar.
Illustration to be provided.
Secured Print
to the iR C2100/2100S using the Secured Print feature can only be printed
when the job's identification number is entered at the Control Panel. Secured
Print jobs cannot be viewed in the spool areas in Fiery Spooler, Fiery
WebSpooler, or Command WorkStation; however, they do appear in the Job
Log. For information about these options and overrides, see Appendix A.
—Enter an identification number for your print job. Jobs sent