Table of Contents
Advertisement
converter (i.e. 3 kV for CC-CU). They are connected between the communication con-
verter and the communication line.
Name
Isolation transformer, test voltage 20 kV
GPS
Name
GPS receiver with antenna and cable
Power supply
External
Optical interfaces for Profibus and DNP 3.0 are not possible with surface mounted
Converters
housings. Please order in this case a device with the appropriate electrical RS485 in-
terface, and the additional OLM converters listed below . Note: The OLM converter
6GK1502-3CB10 requires an operating voltage of 24 VDC. If the operating voltage is
> 24 V DC the additional power supply 7XV5810-0BA00 is required.
Interface used
Profibus DP double ring
DNP 3.0 820 nm
7SD610 Manual
C53000-G1176-C145-4
A.1 Ordering Information and Accessories
Order Number
7XR9516
Order No.r
7XV5664-0AA00
7XV5810-0BA00
Order device with addition-
al module/OLM converter
Profibus DP RS485 /
6GK1502-3CB10
DNP 3.0 RS485/
7XV5650-0BA00
369
Advertisement
Table of Contents
