Yamaha X-MAX 300 Owner's Manual page 78

Table of Contents

Advertisement

Periodic maintenance and adjustment
Replacing the air filter element and
sub air filter element and cleaning
the pre air filter element
1. Place the vehicle on the center-
stand.
2. Remove the rubber plugs.
1. Rubber plug
3. Remove the air filter case cover by
removing the screws.
2
7
2
1. Air filter case cover
2. Screw
4. Pull the air filter element and sub
air filter element out.
1
1
2
2
1. Air filter element
1
1. Sub air filter element
2. Air filter case cover
5. Insert a new sub air filter element
into the air filter case cover.
6. Insert a new air filter element into
the air filter case. NOTICE: Make
sure that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become
[ECA10482]
7. Pull the pre air filter element out,
and then blow out the dirt with
compressed air as shown.
7-15
2
excessively
worn.
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents