Main Switch - Yamaha X-MAX 300 Owner's Manual

Smart key system

Main switch

1
3
1. Main switch
2. Main switch knob
1. Smart key system indicator light "
The main switch is used to turn the ve-
hicle power on and off, lock and unlock
the steering, and open the seat, fuel
tank cap lid and storage compartment
A. After pushing the main switch knob
and confirmation with the smart key
has taken place, the main switch can
be turned while the smart key system
indicator light is on (approximately 4
seconds).
WARNING
Never turn the main switch to
"OFF", " ", or "OPEN" while the ve-
hicle is moving. Otherwise the elec-
EAU76892 trical systems will be switched off,
which may result in loss of control or
an accident.
TIP
Do not push the main switch knob re-
peatedly or turn the main switch back
and forth beyond normal use. Other-
2
wise, to protect the main switch from
damage, the smart key system will
temporarily disable and the smart key
system indicator light will flash. If this
occurs, wait until the indicator light
stops flashing before operating the
main switch again.
The main switch positions are de-
scribed below.
ON (on)
1
1
"
1. Push.
2. Turn.
All electrical circuits are supplied with
the power, and the engine can be start-
ed.
EWA18720
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
3-8
EAU76500
2