Yamaha X-MAX 300 Owner's Manual page 42

Instrument and control functions
When the vehicle is turned on, traction
control is automatically turned on.
To turn the traction control system off,
use the "INFO" switch to change the
information display to the traction con-
trol system display. Then push the "IN-
FO" switch for three seconds. The
display will show "TCSOFF" , and the
"TCS" indicator light will come on.
1
4
1. Traction control system indicator light "
2. Traction control system display
TIP
Turn the traction control system off to
help free the rear wheel if the vehicle
gets stuck in mud, sand, or other soft
surfaces.
NOTICE
Use only the specified tires. (See
page 7-19.) Using different sized
tires will prevent the traction control
system from controlling tire rotation
accurately.
Resetting the traction control sys-
tem
The traction control system will auto-
matically disable under certain condi-
tions; such as when a sensor fault is
detected, or when only one wheel is al-
lowed to rotate for more than a few
seconds. Should this happen, the "
indicator light will come on, and possi-
bly the "
2
1. Traction control system indicator light "
2. Engine trouble warning light "
TIP
When the vehicle is on the centerstand,
do not rev the engine for an extended
period of time. Otherwise, the traction
"
control system will automatically dis-
able and need to be reset.
If the traction control system automat-
ically disables, try resetting it as fol-
lows.
ECA16801
TIP
If the "
ter resetting, the vehicle may still be
ridden; however, have a Yamaha deal-
er check the vehicle as soon as possi-
ble.
4-16
" warning light, too.
1
1. Stop the vehicle and turn it off
completely.
2. Wait a few seconds and then turn
the vehicle power on.
3. The " " indicator light should
turn off and the system be en-
abled.
" indicator light remains on af-
4. Have a Yamaha dealer check the
vehicle and turn off the "
warning light.
"
2
"
"
"