Yamaha X-MAX 300 Owner's Manual page 80

Periodic maintenance and adjustment
1. Bolt
5. Lift up the air filter case slightly, re-
move the rear wheel sensor lead
from the holder, and then remove
the V-belt case cover.
2
7
1. Rear wheel sensor lead
2. Lead holder
6. Remove the V-belt case air filter
cover by removing the bolts.
2
1. V-belt case air filter cover
2. Bolt
1
2
1
1
2
7. Remove the air filter element, and
then blow out the dirt with com-
pressed air from the clean side as
shown.
1
1. V-belt case air filter element
1. Clean side
8. Check the V-belt case air filter ele-
ment for damage and replace it if
necessary.
9. Insert the element into the V-belt
case.
10. Install the V-belt case air filter cov-
er by installing the bolts.
11. Install the rear wheel sensor lead
into the holder at the white tape on
the lead as shown.
7-17
1