Emergency Mode - Yamaha X-MAX 300 Owner's Manual

Periodic maintenance and adjustment

Emergency mode

When the smart key is lost or dam-
aged, or its battery has discharged, the
vehicle can still be turned on and the
engine started. You will need the smart
key system identification number.
To operate the vehicle in emergency
mode
1. Stop the vehicle in a safe place
and turn the main switch to "OFF".
2. Push the main switch knob for 5
seconds until the smart key sys-
tem indicator light flashes once,
then release it. Repeat two more
times. The smart key system indi-
cator light will come on for three
seconds to indicate the transition
to emergency mode.
1. Smart key system indicator light "
3. After the smart key system indica-
tor light goes off, input the identifi-
cation number as follows.
EAU76561
868588
1. Identification number card
2. Smart key (inside)
3. Identification number
4. Inputting the identification number
is done by counting the number of
flashes of the smart key system in-
dicator light.
For example, if the identification
number is 123456:
Push and hold the knob.
↓
The smart key system indicator
light will start to flash.
↓
1
Release the knob after the smart
"
key system indicator light flashes
once.
↓
The first digit of the identification
number has been set as "1".
↓
Push and hold the knob again.
↓
7-38
1
3
2
868588
7