Main Switch - Yamaha MT-09 SP Owner's Manual

Special features
4
3
1. Battery
2. O-ring
3. Battery cover
5. Install the O-ring and battery cov-
er.
6. Gently snap the smart key case
closed.

Main switch

1
2
1 1
1. Main switch
2. Main switch knob
1. Smart key system indicator light "
The main switch is used to turn the ve-
hicle power on/off and lock/unlock the
steering. After pushing the main switch
knob and confirmation with the smart
key has taken place, the main switch
EAUA2552
can be turned while the smart key sys-
tem indicator light is on (approximately
4 seconds).
2 2
Never turn the main switch to "OFF"
or "LOCK" while the vehicle is mov-
ing. Otherwise the electrical sys-
tems will be switched off, which may
result in loss of control or an acci-
dent.
TIP
 Do not push the main switch knob
1
"
 In order to conserve battery pow-
4-14
WARNING
repeatedly or turn the main switch
back and forth beyond normal
use. Otherwise, to protect the
main switch from damage, the
smart key system will temporarily
disable and the smart key system
indicator light will flash. If this oc-
curs, wait until the indicator light
stops flashing before operating
the main switch again.
er, if the main switch remains on
with the engine off for a few sec-
EWA22722