Basic Configuration - Funkwerk W1002 User Manual

2 Quick Install Guide
18
(4) Look for the Internet Protocol (TCP/IP) entry in the list of network components.
Installing the Windows TCP/IP protocol
If you cannot find the Internet Protocol (TCP/IP) entry, install the TCP/IP protocol as fol-
lows:
(1) First click Properties, then Install in the status window of the LAN Connection.
(2) Select the Protocol entry.
(3) Click on Add.
(4) Select Internet Protocol (TCP/IP) and click on OK.
(5) Follow the on-screen instructions and restart your PC when you have finished.
Allocating PC IP address
Allocate an IP address to your PC as follows:
(1) Select Internet Protocol (TCP/IP) and click on Properties.
(2) Choose Use following IP address and enter a suitable IP address, the matching net-
mask, your default gateway and your preferred DNS server.
If you run a DHCP server in your network, you can apply the default Windows setting Ob-
tain IP address automatically and Obtain DNS server address automatically.
Your PC should now satisfy all the prerequisites for the configuration of your device.

2.5.2 Basic configuration

The basic configuration of your access point includes configuration of the IP address and
(optional) the configuration of wireless networks in Access Point mode or the configuration
of bridge links in Bridge mode.
IP Configuration
In the ex works state, your device is configured in DHCP Client mode and therefore dynam-
ically receives an IP address if you run a DHCP server in your network. If this is not the
case, connect your device directly to the configuration PC and use the fallback IP address
.
Alternatively, you can assign your device the required fixed IP address by using the Com-
Point Manager.
To do this, install the program from the CD provided on your configuration PC.
Proceed as follows:
Funkwerk Enterprise Communications GmbH
funkwerk W1002/W2002/WIx040/WIx065