Funkwerk W1002 User Manual page 137

Hide thumbs Also See for W1002:
Table of Contents

Advertisement

Funkwerk Enterprise Communications GmbH
funkwerk W1002/W2002/WIx040/WIx065
WPA2 is the enhancement of WPA. In WPA2, the 802.11i standard is not only implemen-
ted for the first time in full, but another encryption algorithm AES (Advanced Encryption
Standard) is also used.
Access control
You can control which clients can access your wireless LAN via your device by creating an
Access control list (ACL Mode or MAC Filter). In the Access Control List, you enter the
MAC addresses of the clients that may access your wireless LAN. All other clients have no
access.
Security measures
To protect the data transferred on the WLAN, you may need to carry out the following con-
figuration steps in the Wireless LAN -> WLANx -> Virtual Service Sets ->New->/
menu:
• Change the access passwords for your device.
• Change the default SSID, Network Name (SSID) =
point. Set Visible =
a connection with the general value for Network Name (SSID)
SSID settings.
• Use the available encryption methods. To do this, select Security Mode =
,
or
point under WEP Key1 - 4 or Preshared Key and in the WLAN clients.
• The WEP key should be changed regularly. To do this, change the Data Transfer Key .
Select the longer 104 Bit WEP key.
• For the transfer of highly security-critical informationen, Security Mode =
should be configured with WPA Mode =
hardware-based encryption and RADIUS authentication of the client. In special cases,
combination with IPSec is possible.
• Restrict WLAN access to permitted clients. Enter the MAC addresses of the wireless net-
work cards of these clients in the Permitted Addresses -list in the MAC Filter menu (see
Fields in the MAC Filter menu
In the Wireless LAN -> WLANx -> Virtual Service Sets (VSS) menu, a list of all WLAN
networks shown.
8.1.2.1
Virtual Service Sets
Choose the
icon to edit existing entries. Choose the New button to configure other wire-
less networks.
. This will exclude all WLAN clients that attempt to establish
or both, and enter the relevant key in the access
on page 132).
->
New/
8 Wireless LAN
, of your access
and do not know the
,
. This method contains
129

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Funkwerk W1002

This manual is also suitable for:

Wix040Wix065W2002

Table of Contents