Pin Assignments - Funkwerk W1002 User Manual

3 Technical Data
40
1 Power
2 Eth1 (PoE) / Eth2
3 Reset (HW and
Cfg)
4 SFP
5 Serial
6 MMC/SD card
7 Relay N/O

3.2.5 Pin Assignments

3.2.5.1 Ethernet interface
Your device has two Ethernet interfaces. These are used to connect individual PCs or other
switches.
The connection is made via an RJ45 socket.
Fig. 24: Ethernet 10/100 Base-T interface (RJ45 socket)
The pin assignment for the Ethernet 10/100 Base-T interface (RJ45 socket) is as follows:
RJ45 socket for LAN connection
Pin
1
2
3
4
5
6
7
8
Funkwerk Enterprise Communications GmbH
Socket for power supply
10/100 Base-T Ethernet interface
Reset button and delete configuration
SFP slot for 100 mbps fibre module (optional)
Serial interface RS232
Multimedia card (optional)
Alarm relay
Function Eth1 - PoE
TD +/Power
TD -/Power
RD +/Power
Power
Power
RD -/Power
Power
Power
Function Eth 2
TD +
TD -
RD +
Not used
Not used
RD -
Not used
Not used
funkwerk W1002/W2002/WIx040/WIx065