General Product Features - Funkwerk W1002 User Manual

3 Technical Data
42
• Cable sets:
- Serial cable (D-SUB9)
- Ethernet cable (RJ-45, STP)
• Blind stops for SFP
• Mounting materials
- SD slot cover with screws
- 3-pole screw terminal bar for the power supply
- 2-pole screw terminal bar for relay
- Mounting bracket for wall mounting
• Antennas:
- 2 external standard antennas to be screwed on (for funkwerk WI1065)
- 4 external standard antennas to be screwed on (for funkwerk WI 2065 and WI 3065)
• CD
• Documentation:
- User's Guide (on CD)
- Quick Install Guide (printed)
- R&TTE Compliance Information (printed)
- Safety notices (printed)

3.3.2 General Product Features

To ensure safe operation, the WI series devices have a connection to earth. The minimum
cross-section of the earth lead should be 1.5 mm². The distance between the device and
the connection to earth should be as short as possible.
The general product features cover performance features and the technical prerequisites
for installation and operation of your device.
The features are summarised in the following table:
General Product Features
Property
Variants:
Funkwerk Enterprise Communications GmbH
Value
funkwerk W1002/W2002/WIx040/WIx065