Funkwerk W1002 User Manual page 28

2 Quick Install Guide
20
Fig. 14: IP address assignment with the
(3) Enter the network parameters (Device name, IP address, Netmask and Standard
gateway) and click on OK.
Note
The maximum length of the Device name parameter is 32 characters.
The Device name parameter may contain only the letters "a"-"z", "A"-"Z", the digitss
"0"-"9", dash "-" and dot "." to avoid errors by other systems during interpretation of the
Device name. The first character must be a letter, and the last character cannot be a
dot "." or dash "-". A single character is not permitted as a name.
Your device can now be reached over the Ethernet with its IP address using a Web
browser and can now be configured.
Note
The other functions of the ComPoint Manager are not available.
Calling up the Funkwerk Configuration Interface
Funkwerk Enterprise Communications GmbH
ComPoint Manager
funkwerk W1002/W2002/WIx040/WIx065