Funkwerk W1002 User Manual page 217

Funkwerk Enterprise Communications GmbH
funkwerk W1002/W2002/WIx040/WIx065
Monitoring WLAN
Fig. 115: ->
Values in the list Bridge Links
Field
Bridge Link Description
Remote MAC
Uptime
Tx Packets
Rx Packets
Signal dBm
Noise dBm
Data Rate Mbps
If required, the Test link can be used to start a link test.
The link test provides all the data necessary for checking the quality of the bridge link. The
link test also helps you to align the antennas. This option is only displayed if the link state is
.
Bridge link details
You can use the icon to open a summary of further details of the bridge links.
Bridge Links
->
Description
Displays the name of the bridge link.
Displays the MAC address of the bridge link partner.
Shows the time in hours, minutes and seconds for which the
bridge link is active.
Shows the total number of packets sent.
Shows the total number of packets received.
Shows the received signal strength in dBm.
Shows the received noise strength in dBm.
Shows the current transmission rate of data received on this
bridge link in Mbps.
13 Monitoring
209