3
The PLC Memory Window is
displayed. Double-click D on the
Memory Tab of the PLC Memory
Window.
4
Select Display - Hexadecimal from
the View Menu.
5
Select Monitor from the Online
Menu.
6
The Monitor Memory Areas Dialog
Box is displayed.
Check that D is selected.
Click Monitor.
7
Enter 10100 in the Start Address
Field of the D Window.
Check that the start address
changes to D10100.
8
Start CX-ConfiguratorFDT.
*Click Yes if a dialog box to update
the device catalog is displayed
when starting CX-ConfiguratorFDT.
7.IO-Link Connection Procedure
52