Omron CJ2-CPU Connection Manual page 32

5
The dialog box on the right is
displayed. Check the contents
and click No.
6
The dialog box on the right is
displayed.
CX-Programmer and PLC are
automatically connected.
7
Check that CX-Programmer and
PLC are connected online.
*The icon is pressed down
during online connection.
Additional Information
If PLC cannot be connected online, check the cable connection.
Or, return to step 1, check the settings and repeat each step.
For details, refer to Connecting Directly to a CJ2 CPU Unit Using a USB Cable of the
CX-Programmer OPERATION MANUAL (Cat. No. W446).
Additional Information
The dialog boxes explained in the subsequent procedure may not be displayed depending on
the environmental settings of CX-Programmer.
For details on the environmental settings, refer to Options and Preferences in CHAPTER 3
Project Reference in PART 1: CX-Programmer of the CX-Programmer OPERATION
MANUAL (Cat. No. W446).
This document explains the setting procedures when ''Confirm all operations affecting the
PLC'' is selected.
7．IO-Link Connection Procedure
29