Omron CJ2-CPU Connection Manual page 22

7.2.3. Setting the Slave Terminal Configuration Information
Set the Slave Terminal configuration information.
1
Right-click the device icon of
EtherNet/IP Coupler Unit (Unit
0) and select Compare and
Merge with Actual Unit
Configuration.
2
The Compare and Merge with
Actual Unit Configuration Dialog
Box is displayed.
Check that IO-Link Master Unit
is displayed in Actual Unit
Configuration and that Added is
shown in the Result Column.
Click Apply Actual Unit
Configuration.
3
Check that IO-Link Master Unit
is displayed in Configuration on
Sysmac Studio and that
Matched is shown in the Result
Column.
Click OK.
7．IO-Link Connection Procedure
19