Omron CJ2-CPU Connection Manual page 21

6
The New Project is displayed.
The following panes are
displayed in this window.
Left: Multiview Explorer
Top right: Toolbox
Top middle: Edit Configuration
Pane
The following tabs are displayed
in the bottom middle of this
window.
Output Tab Page
Build Tab Page
7
Double-click NX-EIC202 under
Configurations and Setup -
EtherNet/IP in the Multiview
Explorer.
8
The EIP : NX-EIC202 (Master)
Tab Page is displayed in the
Edit Configuration Pane.
Select the device icon of
EtherNet/IP Coupler Unit (Unit
0) and click Online.
9
The dialog box on the right is
displayed. Check the contents
and click OK.
10
When an online connection is
established, a yellow bar is
displayed under the toolbar.
7．IO-Link Connection Procedure
Multiview Edit
Explorer
Configuration
Pane
Output Tab Build Tab
Page
Toolbox
Page
18