Setting The Alarm Clock - Sangean BTR-160 Manual

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio or a buzzer
alarm. In the event of a power interruption your radio has built in memory that will retain your
alarm settings. Ensure that the time is set correctly before setting the alarms.
1. Press the Menu button and rotate the Tuning Control Rotary until 'Main menu' is highlighted.
Press the Tuning Control Rotary to enter the menu.
2. Rotate the Tuning Control Rotary until 'Alarms' is highlighted and the press the Tuning
Control Rotary to enter the selection.
3. Rotate the Tuning Control Rotary until the desired alarm (1 or 2) is highlighted on the display.
Press the Tuning Control Rotary to enter alarm setup.
4. Rotate the Tuning Control Rotary until 'Time' is highlighted on the display. Press the Tuning
Control Rotary to adjust the alarm time.
5. Rotate the Tuning Control Rotary to choose the alarm hour. Press the Tuning Control
Rotary to confirm the setting.
6. Rotate the Tuning Control Rotary to choose the alarm minute. Press the Tuning Control
Rotary to confirm the setting. The display will then return to the alarm setting menu. If the
radio has been set to use a 12 hour clock format, there will also be an option here for setting
AM or PM for the alarm time.
7. Rotate the Tuning Control Rotary to highlight 'Enable' and press the Tuning Control Rotary.
The display will show the Frequency options for the alarm. The alarm frequency options are as
follows:
'Off' - the alarm will be disabled
'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once
'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only
Rotate the Tuning Control Rotary to choose the required alarm frequency option. Choosing
Off will disable the alarm. Press the Tuning Control Rotary to confirm the selection. If you
choose to set the alarm to Once you will also need to set the date using the Tuning Control
Rotary.
26
Alarms
Alarm 1: Off [00:00]
Alarm 2: Off [00:00]
1
Alarm 1
Enable:Off
Time: 00:00
Mode: Buzzer
1-11
Volume: 20
Save
Alarm 1 time
Alarm 1 frequency Alarm 1 time
Off
Dailf
Once
Weekends
Weekdays
Alarm 1 date/time Alarm 1
Enable:Off
2 6 - 0 4 - 2 0 1 6
Time: 07:30
0 7 : 3 0
Mode: Buzzer
Volume: 20
Save
07:00
07:30