Clock Style; Setting The Alarm Clock - Sangean DPR-42BT User Manual

Clock style

Your radio has a range of clock styles for the display when the radio is in Standby. There are four
options available.
1.
With your radio switched on, press and hold Info / Menu button to access the menu for the current mode.
2.
Rotate the Tuning control knob to select "System Settings". Press the Select button to enter the
system settings menu.
3.
Rotate the Tuning control knob to select "Time / Date". Press the Select button to enter the setting.
4.
Rotate the Tuning control knob to select "Clock Style". Press the Select button to enter the setting.
5.
Rotate the Tuning control knob to select a clock style from "Normal Digital", "Big Digital", "Classic
Analog" or "Modern Analog". Press the Select button to confirm the setting. The current style is
marked with a tick and will become visible when the radio is put into standby.

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to DAB, FM radio or buzzer alarm.
Each alarm can be set to sound once, daily, on weekdays or at weekends. In the event of a power
interruption your radio has a built in memory that will retain your alarm settings. Ensure that the time is
set correctly before setting the alarms. Alarms can be set while the radio is in Standby or switched on.
NOTE
When using batteries only and the radio is switched off, the alarms can't be set.
NOTE
If no buttons are pressed for 10 seconds, your radio will exit the alarm setup.
025