Setting The Alarm Clock - Sangean HD Radio HDT-20 User Manual

HD Radio status
1 Multicast set index
HD Radio indicator
2
Preset number
3
Station Frequency
4
5 Station name
6
Artist
b. Guide mode (If the radio is tuned to an HD Radio station with Multicasts)
c. Clock

Setting the alarm clock

Your radio has 2 separate alarms which can be set to wake you to FM or AM. Each alarm can be
set to sound once, daily, on weekdays or weekends. The alarms can be set whether the radio is
in use or in standby mode. Ensure that the time is set correctly before setting the alarms.
Note: If no buttons are pressed for 10 seconds, the radio will exit the alarm setup.
1. Press and hold the Alarm 1 button, for example, until "Alarm 1" is shown on the display. (If the
radio is in power on mode and the headphones are plugged in, you will also hear a beep when
you press and hold the Alarm 1 or Alarm 2 button.)
2. Rotate the Tuning control knob to select 'On' or 'Off'. If 'Off' is selected any current setting for
that alarm will be cancelled. With 'On' selected, press and release the Tuning control knob to
cause the alarm hour digits to highlight on the display.
3. Rotate the Tuning control knob to choose the desired hour for the alarm and press the Tuning
control knob to cause the minute digits to highlight on the display.
Program type
7
Stereo indicator
8
Signal strength indicator
9
Plus (+) indicator: additional HD Radio
10
stations are available
Title
11
1
2
3
4
5
6
7
8
9
GB
10
11
10