Scan Setting - Sangean BTR-160 Manual

Scan setting

When using the FM mode your radio can be set to either scan local stations or to scan all
stations including distant radio stations.
1. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight FM radio
mode. Press the Tuning Control Rotary to select the option.
2. Press the Menu button to enter the FM menu.
3. Rotate the Tuning Control Rotary until 'Scan setting' is highlighted and then press the Tuning
Control Rotary to enter the scan adjustment mode. The current scan setting is indicated with
an asterisk.
4. To set your radio so that only the stations with the strongest signals are found during scanning
rotate Tuning Control Rotary until 'YES' is highlighted. Press the Tuning Control Rotary to
confirm the setting. (Normally this will restrict scanning to local transmissions.) Alternatively,
to set your radio so that all available stations are found during scanning (local and distant
transmissions) rotate the Tuning Control Rotary until 'NO' is highlighted. Press the Tuning
Control Rotary to confirm the setting.
18
FM
104.90MHz
FM
radio
1
FM Radio
FM
Scan setting
Audio setting
System setting
2
Main menu
FM station scan
Strong stations only?
3,4
FM station scan
Strong stations only?
10:38
>
>