Dab Radio - Sangean BTR-160 Manual

DAB Radio

Using DAB mode for the first time
1. Carefully extend the telescopic aerial.
2. Press the Standby button to switch on the radio. If the radio has been used before the last
used mode will be selected.
3. Press the Mode button and rotate the Tuning control Rotary as needed so that DAB radio
mode is selected on the display. Press the Tuning Control Rotary to select the option.
4. If this is the first time that DAB mode is used a quick scan of the Band III DAB channels will be
carried out. The display will show 'Scanning'. (If the radio has been used before the last used
station will be selected instead.) During the scanning process, as new stations are detected
the station counter will increase and the stations will be added to the list which is stored in the
radio. The bar graph indicates the progress of the scan.
5. When scanning is completed the radio will list the stations found (in numeric-alpha order
0....9...A...Z), unless it has previously been tuned to a DAB station. Rotate the Tuning Control
Rotary to scroll through the list of available DAB radio stations. Press the Tuning Control
Rotary to select the highlighted station. The display may show 'Connecting...' while the radio
re-tunes. Press the Volume buttons to set the sound level as needed.
6. If the station list is still empty after the scan the display w ill show "No stations found". If
no stations are found it may be necessary to relocate your radio to a position giving better
reception.
DAB
2
radio
DAB Radio
Scan
Stations: 24
Scanning
3
Station list
Heart
heat
Kerrang
3.5
Kiss
LBC
DAB 12:34
LBC
London's Biggest
Conversation - LBC
5
GB
7