Display Modes - Sangean BTR-160 Manual

Display modes

Your radio has a range of display options when in DAB mode:
1. Press the Info button to cycle through the different options.
a. Text
b. Program Type
c. Multiplex Name / Frequency
d. Signal error / strength
e. Bit rate and audio type
f . Date
A signal strength indicator is always shown in the lower area of the display on the right hand side.
If the broadcast being received is in stereo, then the stereo speaker symbol will be shown.
If the currently tuned station has been stored as a preset, then the preset number will also be
shown.
Displays text messages such as the artist or track name,
phone in number, traffic alerts, etc.
Displays the type of station being listened to such as
Pop, Classic, News etc.
Displays the name of the DAB multiplex to which
the current station belongs as well as its broadcast
frequency.
Displays the signal error and strength for the station
being listened to. A lower error number indicates a better
quality of radio signal. The signal strength graph can be
used when positioning the radio or its antenna. For good
reception the graph should occupy three or more blocks.
Displays the digital bit rate and audio coding information
for the station being listened to.
Displays the current date.
DAB 16:32
SHORT X-PAD
*** Short X-PAD"
DLS" Test Data fr
1
om VP-7664B by P
anasonic***
DAB 16:32
SHORT X-PAD
News
DAB 16:32
SHORT X-PAD
Panasonic DAB SG
Freq:202.928 MHz
DAB 16:32
SHORT X-PAD
Signal Error: 0%
Strength:
DAB 16:32
SHORT X-PAD
Bit Rate:192 kbps
Codec: MP2
Channels: Stereo
DAB 16:33
SHORT X-PAD
Today's Date:
2016/07/12
GB
9