4.2
AC Volt Measurement
• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and the black lead
to the black "COM" input jack.
• Bring the test probe tips into contact with the test points.
• Immediately remove the test probes from the circuit under test if
overload "
" is displayed.
• If reading is unstable and hard to read, push the HOLD button and
read the measurement.
Clamp-on Meter Model 500
Shop for AEMC products online at:
MODEL 500
®
CL AMP METER
I N S T R U M E N T S
600V CAT II
400A
300V CAT III
HOLD
H
Ω
V
A
OFF
COM
!
CAT II
600V
ShopAEMC
www.
range.
.com
1.888.610.7664
9