Table of Contents
Advertisement
4.3
• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and
the black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the test
points.
• If reading is unstable and is hard to read, push the
HOLD button and read the measurement.
14
Shop for AEMC products online at:
AC Volt Measurement
WARNING: Maximum Input Voltage is 600V. Do
not exceed this voltage to avoid electrical shock
and/or damage to the instrument.
WARNING: Immediately unclamp the meter
from the conductor under test if overload "
is displayed.
www.
Clamp-on Meter Models 511 and 512
ShopAEMC
range.
"
.com
1.888.610.7664
Advertisement
Table of Contents
